Appearance
Linux-X570主板-KDE全面温度监控
编辑 GRUB 配置文件
编辑 GRUB 配置文件：sudo nano /etc/default/grub 找到 GRUB_CMDLINE_LINUX_DEFAULT 行，在引号内添加 acpi_enforce_resources=lax。 更新 GRUB 并重启： Ubuntu/Debian: sudo update-grub Fedora/Arch: sudo grub-mkconfig -o /boot/grub/grub.cfg
加载微星常用芯片组内核模块
sudo modprobe nct6775 永久生效 echo "nct6775" | sudo tee -a /etc/module
查看传感器读数
sensor
text
nct6797-isa-0a20
Adapter: ISA adapter
in0: 1.19 V (min = +0.00 V, max = +1.74 V)
in1: 968.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.25 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 144.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 792.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.23 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 1.78 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 912.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 712.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 840.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in13: 600.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 1.50 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 1443 RPM (min = 0 RPM)
fan3: 1425 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
fan6: 0 RPM (min = 0 RPM)
fan7: 4340 RPM (min = 0 RPM)
SYSTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = CPU diode
CPUTIN: +34.0°C (high = +115.0°C, hyst = +90.0°C) sensor = thermistor
AUXTIN0: +37.5°C (high = +115.0°C, hyst = +90.0°C) sensor = thermistor
AUXTIN1: +31.0°C sensor = thermistor
AUXTIN2: +42.0°C sensor = thermistor
AUXTIN3: -1.0°C sensor = thermistor
SMBUSMASTER 0: +43.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
Agent0 Dimm0: +0.0°C
TSI0_TEMP: +43.8°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled然后重启就可以使用系统资源监视器使用这个传感器了。